Trend Car Performance Manifolds


Top Customer Reviews: TAKPART 6 x 33 mm ...

Rating: 4 out of 5 with 6 ratings
4 / 5
I have required these partorisca mine 5 serious Bmw. They were qualities very good and wine with all some focus have required. Returning them in easy era how were a measure esatta . Elements of the good quality and the material was strong. You a work that is to be feign partorisca.
5 / 5
Prizes of @@subject partorisca swirl spent of flap and gaskets. In 2009 I has take a swirl flaps in 535d and a blanking covers him was far more expensive behind then. These some return perfectly in my woman 330d M57 n2 engine, and although it is in accordance with another reviewer that a round gaskets is slightly thinner that BMW some, will do thier acts perfectly well.
4 / 5
Some spaces are of good and apt quality well and snug. A rectangular gaskets(distributed) has been used as they felt and looked of good quality, this in spite of a circulate some have been distant many of decent, (a lot thin compared the genuine originals) to the equal that has required up using an original some.
4 / 5
Quality really well deletes box
is Returned well and crazy such the difference to a car . To good sure recommend this to any with the diesel BMW.
4 / 5
Ideal part, looked to be the good quality, happy with a service!
5 / 5
Awesome Has produced. Access perfectly. Highly recommended

Top Customer Reviews: TAKPART 4 x 22 mm ...

Rating: 4 out of 5 with 3 ratings
4 / 5
These are utmost but partorisca £10 more can take a whole box, with gasket focus & of coverages. A together red. If has the 330 bmw the frames sure take 33mm any 22mm. I am returned these and box improved
5 / 5
Sehr günstig. Passt genau. Obi dicht ist kann nicht sagen hab Quotes Ansaugbrücke noch nicht drauf.
4 / 5
Schnelle Lieferung gutes Produkt guter Preis. Nichts zu meckern. Raisin sehr Gut In data Ansaugbrücke.

Top Customer Reviews: Brass Manifold ...

Rating: 4 out of 5 with 3 ratings
4 / 5
A box of reparation has done very well. Easy to fix. Any question of then. Very satisfied.
5 / 5
Solution of brilliant reparation, excellent quality, highly recommend.
4 / 5
Perfecto, the a bit fine joints, but puténdolas a bit más the fat goes correctly, is the único fails q has. For the demás, ningún question

Top Customer Reviews: TAKPART 4X22MM FOR ...

Rating: 4 out of 5 with 8 ratings
5 / 5
It looks very done but a blanking flat has received them the mark of the scratch there was throughout him. In mine dress the has not thought this would affect to like law so that return all some same. An access was perfect, does not forget partorisca install some coverages of hule that coming with them.

A organge gasket focus in another has not looked partorisca like quality a lot good and bit it thinner that some turn of spaces in. This installation done of a manifold the little difficult to the equal that have maintained to the fall was. Suggest partorisca take a together original of a gasket focus of BMW and whilst yours take the together full of an orange washers that access in a fund of some rays partorisca a manifold. These do not come with a together and has fallen them a down a bay of engine that has taken the longitude while it takes partorisca fish was.
Has Had this returned partorisca the month or like this now, all look well, any one changes to mpg and any one codes of error that mark of explosion on just sure install your vaccum pipes to a swirl actuator of flap before reinstalling a manifold.
4 / 5
Has bought partorisca my BMW 5 series to the equal that have loved to change out of an old a. It was the relatively simple work with some correct tools and an action of my car is better and more responsive to a gas pedal. Some returns to separate perfectly.
5 / 5
Likes declared in there appoint tees is spaces partorisca some common swirl disaster in a bmw deisel engines of a m47 engine, is the abonos snug accesses when dipping them on some focus partorisca a manifold of anchored could be bit it better but another that that does not have any subject in recommending this product
4 / 5
A lot of perfect record but would advise partorisca use some gasket focus also so only partorisca take that it focuses extra
5 / 5
the product was exactly to the equal that has described! Easy to use! Done the light improvement! Quite good! Economic also!
4 / 5
Some returns to separate perfectly in mine 2004 BMW x3 . A intake to the focus of manifold is like this well like factory some.
Súper Fast delivery and excellent service.
4 / 5
The product was exactly to the equal that has described! Easy to use! Done the light improvement! Quite good! Economic also!
5 / 5
Really like a product is returned well and fact and saved like this money 😁

Top Customer Reviews: Cast Iron Exhaust ...

Rating: 4 out of 5 with 1 ratings
4 / 5
In principle all has been glorious, at all that object . Now The see to period, wait that already of for life . For the type of Material.

Top Customer Reviews: JDMSPEED New ...

Rating: 4 out of 5 with 24 ratings
5 / 5
It has dipped this in the 99 Jeep TJ with 6 Amazon of cylinder the nave was perfect. The headed returns perfect and has looked a one has taken was. A flange was a lot of dish as there is sealed well. Dipping some rays some lower on cylinder 3 and 4 was very difficult, some another was normal. A a subject has had is a manifold gasket the holes there is not lined up! It has had to that grind a gasket which has metal like the core in some upper rays. All another was. Well, the time has lost so only that it has to that file these to return. But for $ 65 for headed, gasket and some rays is unlikely to complain.
4 / 5
Manifold Very good!! He a lot there is amiably has built!! Still although takings the gasket am spent another $ 18 bucks and has been Felpro. A gasket this is coming with looking well but Felpro has had metal casements in an exhausts ports. BTW Installing this in a rig, in the 4.0 is the mother !!! Any one the fault of costruttrici, creation of jeep. I have built a forward a then installed bank he with to cherry picker. Easy. Again the quality adds. They are very pleased!!
4 / 5
When have @to @give mine 1999 4.0 TJ has had two cracks of headed, which I later found to in fact be four, has been expecting to owe hundreds of paid for the substitution. It was happy to find that it comprises produced gaskets- still likely 1/5 a prize that would pay it elsewhere.

With that out of a way, a welds looked better that has anticipated for a prize. Blue minimum (a potential indicator of sprain of heat for those of you a lot-machinists).

When In the first place installing, has had one @subjects that takes some inferior rays to seat flush against a intake & exhausts. With which some the animal rule, has taken an advance lateralmente/has left of a intake the manifold seated in a pin of drive, and create this fixed a subject with some manifolds a lot when being any flush. It was too dark to say sure for a time has taken to this point. This in spite of, after leaving it been announces 20 minutes and driven -5 miles, has no massive vacuum leak to the equal that would expect of an improperly seated manifold, as it assumes everything is well. I will update if the things go awry later on.

Some notes:
- Launch was an included gasket. I have taken some looks in him and has known was rubbishes . Another has informed issues to take the to returned on some pins of drives. It chooses on the Fel-Pro for $ 20 in your tent of local parts. I have had one with -200mine in the, as I have finalised so only take my boss has reconstructed the few weeks done, but has taken the new a anyways. Calm does not want to has to that do this work again because you have used the questionable, economic gasket.

- I also tossed some rays comprised and has on elected some rays of better quality & fasteners in the for the total of $ 6. This can not be necessary, but is an economic extra precaution .

- Loosely Attach a headed to a pipe, using the doughnut has comprised, then follow a sequence of torsion for some rays of manifold before presionar a headed to pipe rays. A pipe & of headed will require to rotate to properly vary them.

- With which -200mine, goes back by means of a sequence of torsion and king-presionar all the rays of manifold. I have found that mine, done -200my previously after reconstructing a boss, had done release him. Ossia To be has expected the data of numerous heating that & it cools & cycles. With which retightening would have to that be good.

Will update this description if some cracks of headed or otherwise failure, but like this far, am satisfied. The indication of four stars is due to a poor quality gasket, yes has clashed a prize on $ 10 and has comprised the Fel-Pro, this easily would be the product of 5 stars.
4 / 5
Was the directed returned for the 97 wrangler TJ 4.0 engine. A bit consultor, takes some help Bolting the on. Nizza To have a together extra of hands when you are trying to resist intake and exhaust a same time. I have done this before sure mark all is súper net comprising everything of your rays. So only he all easier.

A last what. This has been in engine that so only reconstruct. And a gasket this is coming with this headed was better the one who that is gone in a reconstruct box. As I used it. Nizza To have the parts of qualities have comprised.
4 / 5
Some looks of manifold to be of excellent quality. A doughnut gasket was the complete rubbishes and I have not trusted some economic gasket an action of manifolds. I have finalised not using these gaskets and has taken the mark of quality. In general it installs it was directly advance and has taken the little on 2 hours, has cleaned a intake corridors and valves while I have had averts. Shot the on and was like this calm like new once again! I will update I course by means of any one breaking welds or another quality of build issues I course to.
4 / 5
Agota the manifold has done well, but a gasket comes with him has not done to focus pertinent. It caused it vacuum leak, which the transmission a Jeep has taken a IAC code, big rev and has run lean. But I took it once it was and it has substituted a gasket with the Fel-pro, all the subjects have been he was. So much with this be produced of the descent has said, mine another manifold were 20 years old and has broken. I will do another description in the pair of month to leave knows like this is it lasted.
4 / 5
Does not match on 100 because of a metal pegs a manifold is supposed to slide to PLOT of finagling but far am happy with him 6 month later
4 / 5
can not think that well has built this thing is for a place this headed in mine 1996 Cherokee XJ last weekend and he am returned perfectly without the only hitch. Jeep of mine does not touch like the truck of rubbish anymore and am very pleased. Highly it recommends this headed!
4 / 5
Headed for the 99 Jeep TJ 4.0. Looks to be the product of the quality but the time will say. For a prize, to the chair likes was the cost of good . A headed really hugs a side of an engine more than a one has taken was. Of then it is like this afterwards to a side of an engine is the little more difficult taking some rays on but was able to complete one installs successfully well. This headed has a flex portion to hopefully deletes to break in a headed. A one has taken was has not had this flex the zone and has been broken almost all a way around. Hopefully This creation will help to delete this type of @@subject. .
4 / 5
Perfect access partorisca mine 98 Jeep Tj. Gasket I holes there is not lined on perfectly but with the little reaming was useable. The new creation adds that you leave flexing partorisca prevent stress on manifold because of vibrations of engine. Very better that original manifold of a factory.
5 / 5
Perfect record for mine 94YJ Wrangler Only hard part has taken a focus in a fund where the mates to an exhaust. The a lot tight access, has has had to that the extend was like this more could and the hammer on with the piece of forest.
5 / 5
Has required this to substitute one broken one in mine 98 cherokee. I have used everything except a gasket. I have used the felpro gasket instead. All there is lined on correctly. As it looks like this I treat it well.
4 / 5
Honradamente Surprised the one who credit this manifold was for a prize. Welds Looks good and didnt have any fitment subject. It looks the solid cost like this far but the time will say.
4 / 5
A lot disappointed. I have bought this and has not verified a box before it installs. The lesson learnt when treating amazon
5 / 5
has on Jointed and installed any question in an old 98 TJ 4.0.
4 / 5
Has used a JDM exhausts manifold in mine 1993 Jeep Wrangler and am very happy with a record and side/ of arrival/ and súper fast shipment. I produce it adds 👍
5 / 5
This perfect record. A thickness of flange is perfect. An only drawback is a gaskets concealed to come with him. It goes advance and take some abonos felpro manifold, and exhaust doughnut gasket. A one this comes with east the tight.
5 / 5
I like a way a manifold has a creation of accordion for movement
4 / 5
We line well until mine 94 YJ and touch like the new jeep
5 / 5
A manifold of prime minister was busted and a flange gasket is not returned has been sent the substitution and flange of what same gasket does not return if the compraventa goes advance and the fel pro
5 / 5
Good prize
is returned mine 99 Jeep Wrangler
like this far like this good
5 / 5
Installed in the 97' Jeep Wrangler. Fact perfectly! Highly recommend this product of quality partorisca his value.
4 / 5
Like this far like this good! Easier That dip on that a OEM. Perfect access. I produce add IMO.
5 / 5
Returns so only like it has been supposed to any very happy question

Top Customer Reviews: XC90 (06-14) ...

Rating: 4 out of 5 with 1 ratings
4 / 5
A plastic is not properly finalising and looks the little has bitten economic comparing to a one that has substituted, but he a work.