Trend HHIP Slotting Cutters


Top Customer Reviews: HHIP 3900-0144 ...

Rating: 4 out of 5 with 10 ratings
4 / 5
Good tool, and good works. This in spite of, a ray that is included is economic and will undress horribly some first time uses it. USE Antisieze in some edges. Also, it calms the favour, and before it use a tool, take a black spacer/washer spend, and mill some pavings of wrench on that. It could not take a prime minister has seen was without doing that, and is easier to does not have to that he with the leaf in a way.
5 / 5
Has run to several questions:
1. A slitting/slotting still of amazon of the leaves with these NO RETURNED some diameters of arbour of a leg. Has no in of the imperial measures (3/4' etc). But some saws are metric (22mm). As any joy to record.
2. An arbour inserts/inserts the eccentricity is 6 more thousands of a spindle axial that causes some saw to chatter when cutting and wear out of some teeth unevenly.
3. A 6mm hex countersink ray that control of the discharges of the arbour on presiona like this tight when I cut it that it can not take he without undressing out of a hex recess in a ray or undressing a hex English tone in a process. I have finalised that it has to that mill of the pavings in one covers like this could them takes was with the wrench. Now the needs to find the new ray to substitute an undressed was one.... :(

Basically is the piece to crap. It would return it but I modified it to take one invernadero the leaf was like this doubts it to them would take it behind.
Buy something better (this in spite of the does not see any a lot of options on Amazon...).
5 / 5
A tool has been rid punctually that reason are by train of the give 2 stars. A reason are not that giving 5 star is reason some edges of interior are rusted and a cradle is frozen. An outside is also rusted. It would send it behind but I require it to complete that I am doing on. I have expected ossia to be in the better condition of then is sold when being as 'NEW'. I will not order of this company again
4 / 5
has not been that it is, but is not 7/16'-20 and therefore no with mine Bridgeport drawbar. He edges to roughly 1/4' first of compulsory hard. Has abundance of another r8 shanked tools that read.
5 / 5
My gram has required edging, but has not had a edger. I have used motorised edgers before and liked him, but has not been to buy of an only for one 20 or feet like this linear of the footpath has required to clean. As I have bought the substitution edger leaf with the 1” hole, has bought this arbour, and has launched an assembly in the 1/2” right corner wireless hammer. Edged My gram in 15 minutes, and a storage of these parts is far more compress that another car in a cochera. I call it wins it.
5 / 5
This arbour was useless like the smallest arbours are so only the series of collars and a lot in fact fixed to an arbour he. Perhaps this was for creation, but sent it behind for the full repayment. These are relativly easy to do and has has done now 2, an each one considering a slitting invernadero possesses.

Has been satisfied with all mine another compraventa of HHIP.
4 / 5
A prime minister an I is gone in a topmast has been corroded and has had some odd material in a threaded end. I sent it immediately behind (súper easy when that taking the Whole Lunches). The pictures are of east a.

A substitution has taken has not been corroded, but has had to that odd material in a threaded end. It was some has dried white material and the brown powder of some class. I cleaned it it was like this more it could with the boss of small piano, finalised it then has been with some WD-40 and the cleaners of pipe of copper boss.

Has given 2 stars because a turn was súper easy.
4 / 5
There has been attended for this tool of another HHIP material I own looks to be the decent quality, but this arbour is unusable. Some bosses will not compress down all a way to the equal that remain with the enormous wobble and an empty of air among an arbour and a leaf. Cleaner tried arrives and seeing if this would help as it has finalised to do at all. So only I will do my own instead.
5 / 5
Well of law, but a die to close volume torqued on really tight when you have cut. It has had to that dip a leg in a tip (with soft jaws) for the take free. A bit anti-take win he of lubricador he much less frustrating to use. But for a prize, still would buy it again has has had to that.
4 / 5
Has been concerned in quaily and has SHOT .... Verified a career was was a lot.... So much I am them good to go...

Top Customer Reviews: HHIP 3700-0139 R8 ...

Rating: 4 out of 5 with 8 ratings
4 / 5
Bought this partorisca use my JT33 launch in my mill. I have not required anything súper attentive, and a launcher was in .004 In all the chance.

This arbour is quite well for a prize. My true short quill, any detectable runout. When they Are trace this on and measured it, has taken .00035 runout (3 And the half ten-thousanths), which is more than quite attentive for my needs. A round of paste has measured to a limit of my indicator (.00005) As runout looks to be an offset. The global quality is a lot well, a grinding is smooth, drawbar the edges are cleaned and has centred. A JT33 the paste had died on, and one launches seated with just the small tap of the hammer of brass.
5 / 5
Ossia Threaded only to the relatively superficial quantity, like the bar of draw has to that be spaced was. No the breaker to treat but if your mill no quell'will accommodate calm will have to that add the spacer to a bar of draw. It would not owe that spend . Ossia An only tool has bought for my mill that has had this question, as his clearly any one the regular access.
4 / 5
A true short arbour -- a R8 keyway was rough and has had to be of-burred to install. A good tool for a prize.
4 / 5
Good arrival on all the surfaces of earth. The true careers and return my launch paste perfectly .
4 / 5
An arbour that is coming with a Accupro the launches would not pull all a way up in a drawbar, and neither one first substitution has found. After unsuccessful tentativas to bore and touch some another deeper, this a work perfectly.
4 / 5
A JT2 the paste has not been to cut correctly. A measure of a paste has not been for any Jacobs tapers, was machined among the JT1 and the JT2 .475 big final, Useless. Returned and has ordered another of ezMachine tools. Perfecto.
5 / 5
I returns was to add career a lot small was like this very like this marks of name in the a lot of more economic prize
5 / 5
has used this for the annex to touch the the contingent taken , perfects

Top Customer Reviews: HHIP 3700-0117 ...

Rating: 5 out of 5 with 1 ratings
5 / 5
Access like the charm. I have very bought these partorisca projects of the recovery in the old hammer presses and law fantastically.

Top Customer Reviews: HHIP 5826-0125 1/8 ...

Rating: 4 out of 5 with 5 ratings
5 / 5
This mill of final looks partorisca be earth correctly and was acute when I received it. I have it it did not use it in fact in sweet steel but believe it would treat also. A centre the cutting action was very also. It would purchase again.
5 / 5
Has used partorisca raisin of finishing (.010) X .75 Deep on 6061-T6. The cutter was pounding and has left the enormous burr in an upper flange.
4 / 5
Adds partorisca a prize... Súper Clean course and reasonable durability partorisca a low low prize.
5 / 5
No the mill of bad end at all
Used it the flatten some aluminium and cut some spaces
Any chatter with a right speed and feed imposed
would recommend
5 / 5
Tried to use this today, he not even hammer 1 hole in cnc

Top Customer Reviews: HHIP 3900-1774 NMTB ...

Rating: 4 out of 5 with 1 ratings
4 / 5
So only 30 usable, some edges of the bar of the draw is bad probably metric, any harden at all a steel is like this soft like sweet steel.

Top Customer Reviews: Meccion 6 Pieces ...

Rating: 4 out of 5 with 10 ratings
4 / 5
On first impress the life looked the together good ..
On using this in spite of have not been impressed..
Has purchased these partorisca return T trim to some hardwood has spent..
Is lasted 5 minutes have begun then smoke.. On inspection some tips were all but non-existent..
Saves your time and money
5 / 5
using a cutter all was very partorisca a first metre. With which that has been he blunts a lot quickly and produces more smoked that sawdust. They are one experienced woodworker and know like this partorisca manage tools partorisca be able to and was very surprised and disappointed that it has degraded it quickly. Some complete waste of money.
4 / 5
Has used one of these cutters , and a yard has finalised is a lot well, the recomend this produces
5 / 5
Incredibly bad quality. Blunt baldes Cela burned and has broken with which one uses. It could any the groove in the piece of forest exerts.

Sees photo of a leaf broken. It imagines yes it concealed the leaf broken was exited flight!
4 / 5
Does not squander your time, does not think another reviewers has to have it bad, these am utter crap!
5 / 5
Cleaned has DIPPED, konnte keine groben Fehlstellen ausmachen. Nur Given Or-Scheibe zwischen Kugellager und Spannmutter nicht vergessen beim Wechsel gives Fräser.
Schaft 8 mm wie angegeben. Massively Anziehmutter, wenn gives Platz is zulässt, eine gute Knows und zuverlässiger als quotes M3 Schräubchen man of data in giving Regel one gives Stars vorfindet.

Quotes Trägerscheiben gives kleinen Fräser sind etwas zu fragil, also aufpassen give sich give nicht irgendwie verzieht (und vorm Fräsen vielleicht prüfen).
Hab' damit Lamello-Schlitze gefräst, Endmaß Gives 4 mm Fräsers waren ca. 4.1 mm In giving Die, ging gerade noch that. Also leichte Abweichungen muss man gerade bei gives kleinen Höhen einkalkulieren, aber für quotes meisten Arbeiten ist gives akzeptabel.

Gives ist jetzt gives Nutset für Die Oberfräsen-Grundausstattung, gives is auch nur selten benötigt wird und einen großen Bereich abdeckt.
4 / 5
Mina of good-looking mills with him gambo given In endowment a lot can used uniquely !!!!!
Description and image Of the product the sud has situated No coherent with how much afterwards received. It owes A ulterior ray or portafresa with appropriate attack !!!
5 / 5
Quotes Fräser sind gut , nur die Fräser to the aufgespannt zu versenden ist schlecht , gives wenn man nur eine Scheibe verwendet braucht man noch mehr Unterlegscheiben oder gives Fräser kommt zu weit nach has extended ? Paßt auch nicht unbedingt beim Fräsanschlag Gives Oberfräse - dann eigenbau.
5 / 5
Zurück geschickt, Gives give Schaft nicht gives Angaben entsprach. 8mm lt. Zeichnung In Wirklichkeit Zöllig.
5 / 5
Nach dem ersten Einschalten Has dipped 2 Scheiben und noch keinem Holzkontakt ist gives Schaft schon verbogen und unbrauchbar. ! Schrott !

Top Customer Reviews: Merry Tools HK ...

Rating: 4 out of 5 with 10 ratings
5 / 5
This cutter of the discharge of the metal is surprising ...100 produced and vendor )
is returned to my bank of work of forest that is fixed to a wall..
And can Confirmation cyts very in fact..
Can cut Fat hard skin with ease.. Metal of discharge 100 the short paper also paper a lot well..
Has done also a bit another cuttings the metal has tried washers/plastic of paper of the credit. Small Thin rays and nails/and A4 100gms paper. The calm fantastic product once takes it dipped up. But sure mark fixed /ray some legs to the solid table or before walk. I need this partorisca take effect of full leverage of a boss.. I am returned the piece of tube of bicycle of the hule in a boss partorisca better grip.. lol
Like this uses .. Of cutting almost any element trhat is mainly flat or small thin rays etc.. Fat boss roughly like this fat likes boss in the cane of welding or so only the little fatter. It can buy a biger one in a future. If the take of the cash lol all and everything
A YARD On a rest for a 'prize..!
Writes Done well the good regime with sales was a lot of very packed thank also to Amazon
considerations bondadosas
Mark goodbye ;)
4 / 5
after reading some descriptions have think that that this was to be the compraventa poor. But I have been surprised. An organism is coming mostly gathered, so only one 'promoted to ray on. The didnt likes that some 2 rays of pívot for a crowbar was 'fully threaded' to the equal that have bought any 10mm breakings of the threaded rays, cut an edge addition and a short plus any washers. Now a turn of crowbar so only in a smooth portion of a ray. I also didnt like an arm how was in 2 bit, as have drilled by means of both sides and joined him permanently with kerbs of pop. In general quite pleased now, but be warned these NEEDS to be bolted to the sturdy bank or workmate. Value of the money - he.
4 / 5
Before what there is remarked is that when I cut it some flat bar he lifted on and slotted among some jaws, industrial Pressbrakes have the second bar that drops down so only in front of a flange of a leaf, for the take lifting, has used a 'useless' angled the bar dipped in another die and welded the to a side with the empty on some jaws of 2mm, as his in two dice can swing out of a way yes needs short material fatter etc, also squeezed a handel to do it snug access in a fusion. The only time will say in a durability of some leaves, but would have to that be able to maintain a flange on him.
4 / 5
A leaf there has been the piece that loses in a cutting flange, as it would not be possible to do clean courses. As another has mentioned, a crowbar of sleeve is an extremely free access . Some rays that link a mechanism of crowbar is threaded to the long of his period, the edges that prints against that resist surface, very poor.

Has not had any instruction. I think it quell'has been there supposition to be the ray to close an open leaf but any one have comprised.

The probably short metal COST, but any cleanly and with a fixed maquinal very poor would not expect it to last long. I have asked the turn pickup.
4 / 5
Has bought this to trim homemade PCBs to the measure and the law is perfectly for that. I did not try it on metal to cover still but is a lot well does like this looks will cut well. Any one looking for the simple (and less messy that other methods) way of copper that short clad FR-4 this are adds for that.
4 / 5
Only courses 160mm long, arms of control in two sections and no the only together turn fixed, also shorter that one a picture of cast, his needs to be gathered but this was a lot.
Operates it of dose, 3mm that the fat dish is quell'has bitten hard for him but the the dose cut it 2mm run of dish with ease and leaves the very good arrival.
In my opinion yes was conscious of all one on points and paid £35 for him calm so only would maintain it, has done.
Sad on some 3 stars but ossia that volume when calm ready elements wrongly.
4 / 5
Was pleasantly surprised with this shears of bank, has cut this in spite of 20 x 2mm sweet steel flat bar easily (I suspect will do 20-25 x 3mm paving of sweep of the LADY).

With the small 'upgrades' a work of the shears of the bank likes much more expensive some.
There is drilled the 7.2 mm hole and touched it to m8 to dip the backside gauge on he for careers of production ( can be take for cutting big discharges) and welded the table, flush to a sinister side (side of clean yard), ( could be fact with the hammer and iron of corner easily) .
With a table for a question of a lifting of metal (clapping a piece to do to a table with welders grips of tope)

In general a shears of bank is a lot of value he and with the little tweeks the turn to something concealed wins his place in a workshop.
4 / 5
Is possible Stevie the marvel has the part time shears of thesis of the labour welding jointed but thinks them would do the better work one he persen the one who has gathered mine. Any instruction or the cast of parts so that it has not been would owe that it has had the control down the device and he has been missing or does not distribute one.
5 / 5
Like the costruttore of jewels of the start this was perfect. The guillotines of tents of the supply of the jewels is easily 6 times a cost. It does not have any characteristics of security like the guard or to close and an extension of boss returns a lot of loosely, but a leaf is acute and run in the straight line easily by means of money, discharges, brass, etc. Like the no handy person taken the pocolos small to imagine was regarding the gather so it has not had any instruction, but has imagined he out of some photos. It does not come with rays and would be better bolted down, but still the calm work resists it down with a delivery or dip something really weighed in a base
5 / 5
would estimate this much bigger that a prize has paid. I have decided to take the risk in a cost and hope for the a lot of one, and I well: it does not have some deserts other people have written on in some descriptions. They are shearing hanged armours plate very light of cradle. A tube of crank is the bit of the sloppy access, but will not be that I need that in all the chance. I locate to the joint, and built on clues he a lot of side of him I so that it can feed sell his lateralmente and cut the perfectly every time in the right corner. Very pleased. So only appearance other buyers have this good experience also.

Top Customer Reviews: Silverline 633657 ...

Rating: 4 out of 5 with 19 ratings
5 / 5
Haven,T used it still but the descriptions are well, looks really sturdy bought partorisca cut Greenhouse glass
4 / 5
has taken this partorisca cut some 2mm glass partorisca the frame of picture, so only does not operate. I have finalised partorisca value a line around 10 times and he still have not broken cleanly.
4 / 5
Quite basic, with the quite wobbly clip, but some looks of good acute end and that is required of the scriber.

With the tip of the carbide of the tungsten am expecting that this will remain acute quite longer that my normal steel scribers.

Like this far very pleased with him and value very good.
5 / 5
Used it so only once like this far, has the final adjustments are well.
4 / 5
Has had load of this solid scribers. A thickness of east an and a force of a tip is some dogs bollox. More a Ive has bought. It would buy 2 it has been you . Calm will not require never another scriber in your life. Clip Of the pocket on is quell'has bitten free taste tig welded he to plant. So only a work
4 / 5
has Arrived punctually and works, has begun so only use like this far any question
4 / 5
the strong element Adds recommends to everything you DIY people.
4 / 5
Has loved the cutter for a glass in a greenhouse. It has done a good work.
4 / 5
Expósito Difficult to use but ossia perhaps because I a lot seldom require court of glass. It looks solid element a lot of
5 / 5
A lot a lot of to say but the a lot of done acts the one who the duty. Nizza Heavy construction.
5 / 5
A good pointed tip, which have used partorisca mark glass partorisca cutting to measure. A tip has done the orderly fine line.
5 / 5
Whilst Still partorisca use look sturdy quite and has the clip of handy pocket. It does not anticipate any questions with east but will update to have any one.
4 / 5
This scriber has been bought reason have had misplaced a one me, and this one is the really good alternative .
A lot of gain to scrape a surface of china partorisca give a glue the tone.
4 / 5
Well and acute but can not cut a glass unfortunately
4 / 5
tool Very useful in low prize estupefaciente with fast delivery
5 / 5
Touch the Glass Scriber, well for the work of detail likes the nib is a lot well, good weight.
4 / 5
Well it has bitten of boxes partorisca pence. Access neatly in upper pocket with a clip of pen and done a good work.
5 / 5
Very good scriber, any need to press down hard scribe , so only and pause, so only that has required, very heavy feeling easy to control
4 / 5
has valued around the boat has come with east, is gone in the two times, has touched partorisca boil water to a bookmark, dipped in icy water, has repeated. A icy the diving of water can be exchanged with cold running water. Repeated until the visible fractures. Slightly wry and the pauses avert quite neatly in a seam- perfect. My technician was bad one first tentativa= has broken to the long of a wrong part of a boat. How it was perfect and a third still has not broken in spite of regulating repeat but have faith!